1. Forum
  3. Geiger counter discussions
  5. Commericial geiger counters
  7. GQ GMC-320 plus v4 setup for radlog

GQ GMC-320 plus v4 setup for radlog

More
6 years 4 months ago #3716 by ralphemorgan
GQ GMC-320 plus v4 setup for radlog was created by ralphemorgan
I have a GMC-320 Plus working OK with the GQ GMC Data viewer app, and it uploads data to GMCmap every 5 mins OK.

I'd like to use RadLog instead, but using the settings attached

it does not get any data from the running GMC-320 plus. Anyone running a GMC-320 Plus ver 4 with RadLog on a Windows 10 PC?, that knows what settings should be used?
Attachments:

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #3719 by mw0uzo
Replied by mw0uzo on topic GQ GMC-320 plus v4 setup for radlog
Does the data view app also show COM3 as the serial port?
Only one application can use a serial port at one time, so RadLog won't work if GMC Dataviewer is running too.
Plenty of people have the GMC320 working, and I'm pretty sure RadLog sets the Speed by itself when you select the GMC serial mode.
Hmmm, I wonder what's wrong?

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #3722 by Bert490
Replied by Bert490 on topic GQ GMC-320 plus v4 setup for radlog
Audio-in counts as a separate port too. Then you can feed 2 apps with one detector.

Please Log in or Create an account to join the conversation.

Moderators: Gamma-Man
  1. Forum
  3. Geiger counter discussions
  5. Commericial geiger counters
  7. GQ GMC-320 plus v4 setup for radlog
Time to create page: 0.180 seconds
Powered by Kunena Forum
Everything's free. Please support us by considering a donation. Log in first!
Solar powered Raspberry Pi 4 server stats: CPU 56% Memory 13% Swap 17% CPU temp=58.4'C Uptime 40 Days