PyRadmon install and set up on Raspberry Pi (Wheezy Raspbian)

More
4 years 4 days ago - 4 years 4 days ago #1325 by Juzzie
I am using a wifi dongle with my rpi. I have experienced what you describe and believe this happens if there is no server response within 1 minute, and that it is a python glitch.
I have a terribly unreliable internet connection that often drops out for a time...
For me, thimo fixed this problem in the dev version of "multipyradmon - no audio" at sourceforge.
I am still using the stable version of pyradmon for submitting data to a different site and it hangs like you describe if the internet connecton craps out for more than 1 minute.

Owner and operator of "southofhobart" monitoring stations.
Last edit: 4 years 4 days ago by Juzzie. Reason: left out "no audio"

Please Log in or Create an account to join the conversation.

More
4 years 4 days ago #1326 by ThibmoRozier
It has to do with timeout, then.
Will give it a quick check asap. :)

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #1362 by ThibmoRozier
After some thoughts I decided to release the development versions as a full version.
Should be downloadable within one hour after this post. :)

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago - 3 years 11 months ago #1363 by ThibmoRozier
The files have been updated and set as released.
The release version is 1.1.17 :)
Oh.. And I also added icons to the compiled .exe files. :)
These "should" run without installing python or pyaudio!
Last edit: 3 years 11 months ago by ThibmoRozier.

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #1375 by jnissen
Seems to be working. Time will tell as it often acted up after a week or so.
The following user(s) said Thank You: ThibmoRozier

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #1376 by ThibmoRozier
Thanks for testing, I hope it solves the issues. :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum